Canon imageRUNNER ADVANCE C3330 Series Service Manual page 238

3. When the settings are reflected, the DCM file saved on the hard disk of the device is displayed. Select [SELECT],
enter the number displayed on the left side of the file name to select, and press [OK].
4. Confirm that "*" is displayed on the right side of the selected file, and press [->].
5. Select [PASSWD], enter a password, and then press [OK].
NOTE:
• "<-" is displayed on the right side of the file to indicate that the selection of the file has been confirmed.
• "***" is displayed after the password is entered.
• You can select [REPLACE] to import a file exported from another machine as a file exported from this machine. The target
items for importing are changed. (Refer to
6. After selecting [RESTORE], press [OK] to execute import.
""List of items which can be imported" on page
226
2. Technology
227")