Canon imageRUNNER ADVANCE C3330 Series Service Manual page 699

COPIER (Service mode for copier) > DISPLAY (State display mode) > USER
BRWS-STS 1
Detail
Use Case
Caution
Display/Adj/Set Range
Related Service Mode
■ ACC-STS
COPIER (Service mode for copier) > DISPLAY (State display mode) > ACC-STS
FEEDER 1
Detail
Use Case
Display/Adj/Set Range
SORTER 1
Detail
Use Case
Display/Adj/Set Range
DECK 1
CARD 1
Detail
Use Case
Display/Adj/Set Range
RAM 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
COINROBO 1
Detail
Use Case
Display/Adj/Set Range
Display of service browser ON/OFF
To display whether the service browser can be used.
If the value is 1, [Service Browser] button is displayed on the service mode initial screen.
The value of BRWS-STS switches whenever COPIER> FUNCTION> INSTALL> BRWS-ACT is
executed, but ON/OFF of service browser is enabled after reboot. If the service browser does not
start even though the value of BRWS-STS is 1, turn OFF/ON the main power switch.
When checking the usage status of service browser
The value of BRWS-STS is linked with COPIER> FUNCTION> INSTALL> BRWS-ACT, but the
service browser cannot start even though 1 is displayed unless the main power switch is turned
OFF/ON.
1 to 2
1: ON (Available), 2: OFF (Not available)
COPIER> FUCNTION> INSTALL> BRWS-ACT
Display of DADF connection state
To display the connection state of DADF.
When checking the connection between the machine and DADF
0 to 1
0: Not yet connected, 1: Connected
Connect state of Finisher-related option
To display the connection state of Finisher-related options.
When checking the connection of Finisher-related options
Left column (connection state of Finisher-related options): 1 to 5
1: Without Saddle
2: With Saddle, without Folding Unit
3: With Saddle and Inserter, without Folding Unit
4: With Saddle and Folding Unit, without Inserter
5: With Saddle, Inserter and Folding Unit
Right column (connection state of Finisher-belonged Inserter): 0 to 4
0: No hole, 1: 2-hole, 2: 2/3-hole, 3: 4-hole, 4: 4-hole (SW)
[Not used]
Dspl of connection state of Card Reader
To display the connection state of Card Reader.
When checking the connection between the machine and the Card Reader
0 to 1
0: No card has been inserted with the Card Reader connected. (Copy is not available.)
1: Card Reader has not yet been connected, or the card has been inserted with the Card Reader
connected. (Copy is available.)
Display of MNCON PCB memory capacity
To display the memory capacity of the Main Controller PCB.
When checking the memory capacity of the machine
N/A (Display only)
1024 (Fixed)
Dspl of Coin Manager connection state
To display the connection state of the Coin Manager.
When checking the connection between the machine and the Coin Manager
0 to 1
0: Not yet connected, 1: Connected
687
8. Service Mode