Fixing System; Removing The Fixing Unit; Removing The Fixing Film Unit - Canon imageRUNNER ADVANCE C3330 Series Service Manual

Fixing System

Removing the Fixing Unit

1. Open the Right Door.
2. Grasp the light-blue handle [1], and remove the Fixing Unit [2].
NOTE:
• Parts Counter : COPIER > COUNTER > DRBL-1 > FX-UNIT
• The parts counter of the Fixing Unit is automatically cleared when a new Fixing Unit is detected.
* When a fixing error (E001/E002/E003) occurs, be sure to turn ON the power after closing the Right Door.
• When FX-UNIT is cleared, FX-LW-RL/ FX-UP-FR/ FX-LW-BS are also cleared at the same time.

Removing the Fixing Film Unit

■ Preparation
1. Remove the Fixing Unit."Removing the Fixing Unit" on page 358
■ Procedure
1. Remove the Fixing Disengagement Gear [1].
• 1 Claw [2]
4. Parts Replacement and Cleaning
[1]
[2]
1x
358
[2]
[1]