Removing The Cassette 2 Pickup Unit - Canon imageRUNNER ADVANCE C3330 Series Service Manual

4. Remove the Cassette 1 Pickup Unit [1].
• 4 Screws [2]
NOTE:
Note at Removal/Installation:
Remove the Cassette 1 Pickup Unit [2] while pulling it out along the [A] part of the Right Door Shaft Support Block [1] on the left
side.

Removing the Cassette 2 Pickup Unit

■ Preparation
1. Pull out the Cassette 1/2.
2. Open the Right Door/Right Door (Lower)/Cassette Right Door Assembly.
3. Remove the Right Cover (Rear Upper).
4. Remove the screw on the left side of the Cover (Rear Lower).
5. Remove the Right Cover Assembly (Rear Lower).
4x
[2]
[2]
[A]
[1]
[2]
376
4. Parts Replacement and Cleaning
[1]
[2]