Canon imageRUNNER ADVANCE C3330 Series Service Manual page 893

COPIER (Service mode for copier) > OPTION (Specification setting mode) > IMG-MCON
PSCL-TBL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Amount of Change per
Unit
BGE-OFS 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
■ IMG-DEV
COPIER (Service mode for copier) > OPTION (Specification setting mode) > IMG-DEV
DRM-IDL 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Setting of Bk-color density increase
To set whether to increase the density of Bk-color only without changing the density of Y/M/C-
color.
When 1 is set, the parameters of auto gradation adjustment (full adjustment) are adjusted so that
only the density of Bk-color is increased.
Upon user's request (to increase the density of Bk-color)
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
3) Execute auto gradation adjustment (full adjustment).
0 to 1
0: Normal, 1: Only the density of Bk-color is high
It differs according to the location.
1
Fine adj at bckgd adj (bckgd removal)
To make a fine adjustment of the background adjustment (background removal) level which can
be set manually.
Break up the adjustment values into smaller ones when user does not satisfy with the default
adjustment values.
When color fogging occurs on the output image when copying yellowed blank paper as an original
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Since the background color is set to be washed out with this mode, not only the background of
yellowed blank paper, but also other light colors (light blue, etc.) are washed out.
-15 to 15
0
Copy> Options> Density> Background Density
Set first idle rotation time in HH Env
To set the idle rotation time to be performed at the beginning of a workday in an HH (high
temperature and high humidity) environment.
When coarseness occurs on the image at the beginning of a workday
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When 1 is set, startup takes time.
0 to 2
0: OFF, 1: ON (HH environment only), 2: ON (all environments)
0
881
8. Service Mode