Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1131

15.
16. Remove the covers of the 4 Cord Guides, and affix the Cord Guides to the position as shown in the figure.
17. Put the Speaker Cable through the Cord Guides and install the 4 covers of the guides.
CAUTION:
• Do not cover the Exhaust Outlet with the Cord Guide.
• Do not affix a Cord Guide on the Reader Cable Cover
■ Routing the Cable (when installing this equipment and other options
simultaneously)
● For Copy Card Reader-F1 and Voice Guidance-F2.
1. Securing the Cable of the Voice Guidance
1. Remove the covers of the 4 Cord Guides, and affix the Cord Guides to the position as shown in the figure.
2. Insert only the Speaker Cable through the 4 Cord Guides.
3. tall the 4 Cord Guide Covers.
2. Securing the Cable of the Copy Card Reader
1. Remove the covers of the 2 Cord Guides, and affix the Cord Guides to the position as shown in the figure.(Use the
Cord Guides (thick) included with the Copy Card Reader.)
2. Remove the Face Seal, and install the Wire Saddle. (included with the Copy Card Reader).
3. Fold the Copy Card Reader Cable at the [A] part, and insert only the Copy Card Reader Cable through the 2 Cord
Guides and then secure it in place with the Wire Saddle.
2x
4x
1119
Reader Cable Cover
Exhaust Outlet
9. Installation