Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1056

Inner 2way Tray-J1
Points to Note at Installation
• Be sure to install this equipment after installing the 3 Way Unit.
CAUTION:
Marked portion
When tightening the screws, do not tighten them too tightly. Otherwise, there is a risk of damage and deformation of screw
holes.
Checking the contents
Check Items when Turning OFF the Main Power
Chek that the main power switch is OFF
1. Turn OFF the main power switch.
2. Be sure that display in the Control Panel and the lamp of the main power supply are turned off, then disconnect the
power plug.
Installation Outline Drawing
1x 1x
1044
M3x6
1x
9. Installation