Canon imageRUNNER ADVANCE C3330 Series Service Manual page 920

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
DATE-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
MB-CCV 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CONTROL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
B4-L-CNT 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Setting of date/time display format
To set date/time display format according to the country or region.
The setting is reflected to the order of date set in Date/Time Settings in Settings/Registration menu
and the order on the report output.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: YYMM/DD, 1: DD/MMYY, 2: MM/DD/YY
It differs according to the location.
Preferences> Timer/Energy Settings> Date/Time Settings
Control card usage limit for Mail Box
To restrict use of control card for Mail Box.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Unlimited, 1: Limited
1
Charge setting of PDL job
To set charge count transmission of PDL job to the connected charge management device (Coin
Manager or non-Canon-made control card).
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: No charge, 1: Charge
0
COPIER> OPTION> ACC> COIN
Count setting of B4 size
To set B4 count with software counter 1 to 8 as to whether B4 is counted as large size or small
size.
When 1 is set, B4 or larger size paper is counted as large size while paper smaller than B4 is
counted as small size.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Small size, 1: Large size
0
COPIER> OPTION> CUSTOM> SC-L-CNT
908
8. Service Mode