•
< When the Utility Tray is installed >
CAUTION:
Because the Copy Tray comes in contact with the rib if installed while laid flat, be sure to install it while keeping it upright.
3. Connect the power plug to the outlet.
4. Turn ON the main power switch of the host machine.
Checking after Installation
NOTE:
The setting of "ON/OFF of Use Optional Output Tray" can be made only when logged in as an administrator.
When "System Manager Information Settings" is set, it is required to log in as a system manager in accordance with instructions
of the user administrator.
Password at the time of shipment
System Manager ID: Administrator
System PIN: 7654321
1. Select [Settings/Registration] > [Function Settings] > [Common] > [Paper Output Settings] > [ON/OFF of Use
Optional Output Tray].
2. Set the Delivery Tray 1 to [ON], and press [OK].
Rib
1052
9. Installation
Rib