Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1164

Informing the System Administrator That Installation Is Complete
• When installation is complete, give the following explanation to the system administrator.
• When installation is complete, inform the system administrator that the security functions have been added, and explain the
procedure for checking whether the security functions are enabled.
• This will enable the system administrator to quickly detect when the functions become disabled and request a service call
to correct the error.
Checking That Installation Is Complete:
Following the section "Checking the Security Version", display the version information of the security chip from [Check Device
Configuration] on the Control Panel, and show the system administrator that "2.01" is displayed for the [Canon MFP Security
Chip] item.
Checking That the Security Functions Are Enabled:
Request the system administrator to refer to the section "Checking the Security Mark" to confirm that the security functions are
enabled each time the host machine is started by checking the security mark.
Executing auto gradation adjustment
When this product is installed, the machine initializes its HDD, resetting the data used for auto gradation correction.
Therefore, execute full adjustment of auto gradation adjustment after installing this kit to enable proper images to be output.
Execution of the minimum installation work
Be sure to execute the minimum installation work in accordance with the Setup Guide because HDD is initialized when this kit is
installed.
1152
9. Installation