Image Formation System; Removing The Drum Unit - Canon imageRUNNER ADVANCE C3330 Series Service Manual

Image Formation System

Removing the Drum Unit

CAUTION:
• If you perform work while in Deep sleep mode or when the power is turned OFF while in Deep sleep mode, the Primary
Transfer Roller isl not be disengaged.
• When removing the Drum Unit (Bk), be sure to do so after returning the machine to a standby state.
1. Open the Front Door.
2. Open the Drum Unit Retaining Cover [1].
3. Pinch the light-blue [A] part, and pull out the Drum Unit [1].
CAUTION:
Since there is a risk of damaging the Photosensitive Drum, do not touch the surface.
Be sure to block light to the removed Drum Unit using paper, otherwise it will be exposed to light.
[1]
[A]
318
4. Parts Replacement and Cleaning
[1]