Original Exposure System; Removing The Reader Scanner Unit - Canon imageRUNNER ADVANCE C3330 Series Service Manual

Original Exposure System

Removing the Reader Scanner Unit

■ Procedure
1. Open the ADF Unit.
2. Remove the Glass Retainer (Right) [1] and then remove the Copy Board Glass [2].
• 2 Screws [3]
CAUTION:
Grease is applied on the 2 Rail Shafts [1] of the Reader Scanner Unit. If you have touched the grease, be careful not to
put it to other parts.
3. Move the Belt [1] to move the Reader Scanner Unit [2] to the cut-off part [3] of the Reader Scanner Unit.
2x
[1]
[2]
[1]
295
4. Parts Replacement and Cleaning
[2]
[3]
[2]
[3]
[1]