Canon imageRUNNER ADVANCE C3330 Series Service Manual page 473

3. Connect the USB memory storage device to the USB port.
4. Press [1] and select the version of system software to be used on the screen for selecting version.
5. Select [1]: Update (Auto) to start download.
[1] to [0]: Execute download/ any key other than [0]: Return to the menu screen
During the download process, download status is displayed on the control panel.
Writing to the system software area on the FLASH PCB is started once download is completed. When writing to the Dcon
(ACC1, CCM or CCB if there is an option) is completed, the machine is automatically restarted. After writing of SafeCont is
completed, the machine is automatically restarted again.
6. When the main menu is displayed, press the removal key at the bottom right on the touch panel and select removal
of memory media device, and then remove the USB memory storage device.
7. Enter service mode to check the version.
● [2]: Upgrade (w Confirmation)
Compares the versions of the system software in the machine and the USB device, and downloads system software that is a
new version in the USB device.
When the versions of system software in the USB memory storage device are older version, a confirmation message is displayed
on the control panel so that the user can select whether to overwrite or not. This step is skipped when the target software is the
same version.
1. Remove the network cable if any network cable is connected to this machine.
[ [ [ [ [ [ [ [ Select Version (USB) ] ] ] ] ] ] ] ]
-------------------------------------------------------
[1] : SYSTEM_0126-JEGSFI-DCON_0110-FIN_CON_0102-TSP_0142
[C] : Return to Root Menu
Do not turn OFF power without executing the shutdown sequence.
[ [ [ [ Normal Update Main Menu (USB) ] ] ] ]
------------------------------------------------------------
Ver. SYSTEM_0126-JEGSFI-DCON_0110-FIN_CON_0102-TSP_0142
[1] : Update (Auto)
[2] : Update (w Confirmation)
[3] : Update (Overrite all)
[4] : Clear/Format
[5] : Backup/Restore
[6] : Other Menu
[7] : Update (Backupless mode)
[8] : Download File
[C] : Return to Select Version
[Reset]: Start shutdown sequence
Do not turn OFF power without executing the shutdown sequence.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FirmDownload 0% FirmBackup
StdCont -%
Dcon -% CCM
ACC1 -% CCB
ACC2 -% RCON
ACC3 -% TSP
Reboot
SafeCont -%
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Updating software... Do not turn OFF the main power.
Mise a jour du ligiciel... Ne mettez pas le peripherique hors tension.
Software wird aktualisiert...Schalten Sie das Gerat nicht AUS.
ソフトウェアの更新中です。電源を切らないでください。
461
-%
-%
-%
-%
-%
6. Troubleshooting