Canon imageRUNNER ADVANCE C3330 Series Service Manual page 853

COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
BRWS-FAV 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
STND-PNL 2
INVALPDL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
IMGCNTPR 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CDS-FIRM 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
Set to allow serv browser favorite reg
To set whether to allow registration of favorites in the browser for servicing.
When 1 is set, favorites in the browser for servicing can be edited, and any URLs can be accessed.
When accessing to any URLs
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Prohibited, 1: Allowed
0
[Not used]
Disabling of PDL license
To disable the registered PDL license.
When 1 is set, PDL is disabled even if a PDL license has been registered. Make this setting to the
machine installed at convenience stores, which do not allow PDL to be used
When prohibiting the use of PDL
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Enabled, 1: Disabled
0
Setting of image quality mode
To set the image quality mode.
When 0 is set, the image quality priority mode is enabled. When this mode is enabled, gray color
is reproduced with process colors in all cases.
When 1 is set, the counter priority mode is enabled.
When 2 is set, the image quality priority (photo) mode is enabled. For photo, gray color is
reproduced with process colors. For text and graphic, it is reproduced with single Bk-color.
Upon user's request
Enter the setting value, and then press OK key.
0 to 2
0: Priority on image quality, 1: Priority on counter, 2: Priority on image quality (photo)
1
Set to allow firmware update by admin
To set whether to allow the user (administrator) to update firmware.
When 1 is set, Updater can be activated from Settings/Registration menu.
When allowing the administrator to update the firmware
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Prohibited, 1: Allowed
JP:0, USA:0, EUR:1, AU:0, CN:0, KR:0, TW:0, ASIA:0
COPIER> OPTION> FNC-SW> LCDSFLG
CDS: Contents Delivery System
841
8. Service Mode