Maintenance - Canon imageRUNNER ADVANCE C3330 Series Service Manual

4. Press [Yes] button.
Obtain the download file information for communication test from the distribution server (to execute the communication test
to the distribution server).
Using the download file information for communication test, the contents for test are downloaded from the file server (for the
communication test to the file server).
5. Upon the communication test completed, the communication test result screen is shown.
Press [OK] button to exit this operation.
NOTE:
Carry out the communication test with both Embedded RDS and CDS.

Maintenance

■ Upgrading Updater
The firmware installed in the device should be also upgraded when upgrading Updater. See the section of "Version Upgrade" ,
Chapter 6 "Troubleshooting" for more detailed information.
Setting information and logs (update logs/system logs) are carried over.
■ Formatting Hard Disk
Since Updater is a MEAP application, its contents can be temporarily saved in the MEAP application storage area on PC via SST
during formatting or replacing HDD. See Chapter 6 Troubleshooting > Backup/ Restore.
The settings initialized in format or replacement should be restored. See the section of
information.
NOTE:
When formatting or replacing HDD, distribution schedule, downloaded firmware (not updated yet) and logs (update/system logs)
will be deleted.
"Preparation" on page 202
212
2. Technology
for more detailed