Canon imageRUNNER ADVANCE C3330 Series Service Manual page 736

COPIER (Service mode for copier) > ADJUST (Adjustment mode) > IMG-REG
REG-HS-Y
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
REG-HS-C
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
REG-HS-K
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
REG-V-Y
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
1 Fine adj Y-clr wrt start pstn:horz scan
To adjust the write start position of Y-color image in the horizontal scanning direction in increments
of 1 pixel or less.
When Y-color displacement in the horizontal scanning direction occurs (smaller than 1 pixel)
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
It is recommended to use this item from situation mode.
-128 to 127
pixel
0
1/16
1 Fine adj C-clr wrt start pstn:horz scan
To adjust the write start position of C-color image in the horizontal scanning direction in increments
of 1 pixel or less.
When C-color displacement in the horizontal scanning direction occurs (smaller than 1 pixel)
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
It is recommended to use this item from situation mode.
-128 to 127
pixel
0
1/16
1 Fine adj Bk-clr wrt start pstn:horz scan
To adjust the write start position of Bk-color image in the horizontal scanning direction in increments
of less than 1 pixel.
When Bk-color displacement in the horizontal scanning direction occurs (smaller than 1 pixel)
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
It is recommended to use this item from situation mode.
-128 to 127
pixel
0
1/16
1 Ruf adj Y-clr wrt start pstn:vert scan
To adjust the write start position of Y-color image in the vertical scanning direction in increments
of 1 pixel.
When Y-color displacement in the vertical scanning direction occurs
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
It is recommended to use this item from situation mode.
-128 to 127
line
0
1
724
8. Service Mode