4. Install the 2 Cord Guide Covers.
CAUTION:
• Do not cover the Exhaust Outlet with the Cord Guide.
• Do not affix a Cord Guide on the Reader Cable Cover.
Checking the Settings
NOTE:
When changing the settings upon user's request, it is required to log in as a system manager in accordance with instructions from
the user administrator.
1. Connect the power plug of the host machine to the outlet.
2. Turn ON the main power switch.
3. Select Settings/Registration > Preferences > Accessibility > Voice Navigation Settings > Use Voice Navigation, and
check that the setting is ON.
4. Select Settings/Registration > Preferences > Accessibility > Voice Navigation Settings > Voice Guide from Speakers,
and check that the setting is ON.
5. Turn OFF/ON the main power of the Host Machine.
Operation Check
■ When Using
1. Press "Reset" key for more than 3 seconds.
2. Once the indication on the screen is framed in red, the "Voice Guidance Kit" becomes enabled.
■ When Stopping to Use
1. Press "Reset" key for more than 3 seconds.
Wire Saddle
7x
1120
Reader Cable Cover
[A]
[B]
Exhaust Outlet
9. Installation