Setting The Limited Functions Mode From The Service Call Message Screen - Canon imagePRESS C7000VP Reference Manual

Setting the Limited Functions Mode from the
Service Call Message Screen
If the Service Call Message screen appears, even after you restart the
machine, there are some cases in which you can continue operation
the machine. If the screen in step 1 below appears, turn the Limited
Functions Mode 'On' as a temporary solution, until the problems is
resolved.
IMPORTANT
If you turn the main power switch to the " " side when there is a job waiting
to print, that job is erased.
NOTE
If you set Limited Functions Mode to 'On' from the Service Call Message
screen, Limited Functions Mode in Common Settings (from the Additional
Functions screen) is also set to 'On'. (See "Limiting Functions,"
on p. A4-49.)
1
Press [Limited Fnctns Mode].
2
Press [Yes].
If you do not want to turn the Limited Functions Mode 'On', press [No].
A message prompting you press [Shutdown], and turn the main power
OFF and ON appears.
3
Press [Shutdown]. The main power switch of the machine
switches to the " " side automatically.
Service Call Message A8-127