Canon imageRUNNER ADVANCE C3330 Series Service Manual page 577

584-0002-02
Detection Description
Remedy
584-8001-02
Detection Description
Remedy
5F0-8001-02
Detection Description
Remedy
Shutter HP error
The Shutter HP Sensor does not detect the shutter although the Stack Ejection Motor has been
driven for 3 seconds.
STAPLE FIN-U1/BOOKLET FIN-U1
[Related parts]
- Harnesses and connectors from the Finisher Controller PCB to the Shutter HP Sensor
- Harnesses and connectors from the Finisher Controller PCB to the Stack Ejection Motor
- Harnesses and connectors from the Finisher Controller PCB to the Stack Ejection Lower Roller
Clutch
- Harnesses and connectors from the Finisher Controller PCB to the Shutter Clutch
- Shutter drive mechanism
- Shutter HP Sensor (PI113)
- Stack Ejection Motor (M102)
- Stack Ejection Lower Roller Clutch (CL102)
- Shutter Clutch (CL101)
- Finisher Controller PCB (PCB1)
[Remedy] Check/replace the corresponding harnesses/cables or connectors or the parts.
[Reference] When replacing the Finisher Controller PCB, refer to "Adjustment> Adjustment when
Replacing the Parts" in the Service Manual.
Shutter HP error
The shutter does not come off the Shutter HP Sensor although the Stack Ejection Motor has been
driven for 3 seconds.
STAPLE FIN-U1/BOOKLET FIN-U1
[Related parts]
- Harnesses and connectors from the Finisher Controller PCB to the Shutter HP Sensor
- Harnesses and connectors from the Finisher Controller PCB to the Stack Ejection Motor
- Harnesses and connectors from the Finisher Controller PCB to the Stack Ejection Lower Roller
Clutch
- Harnesses and connectors from the Finisher Controller PCB to the Shutter Clutch
- Shutter drive mechanism
- Shutter HP Sensor (PI113)
- Stack Ejection Motor (M102)
- Stack Ejection Lower Roller Clutch (CL102)
- Shutter Clutch (CL101)
- Finisher Controller PCB (PCB1)
[Remedy] Check/replace the corresponding harnesses/cables or connectors or the parts.
[Reference] When replacing the Finisher Controller PCB, refer to "Adjustment> Adjustment when
Replacing the Parts" in the Service Manual.
Paper positioning Plate HP error
The Saddle Paper Positioning Plate HP Sensor does not detect the paper positioning plate
although the Saddle Paper Positioning Plate Motor has been driven for 1500 pulses.
STAPLE FIN-U1/BOOKLET FIN-U1
[Related parts]
- Harnesses and connectors from the Saddle Stitcher Controller PCB to the Saddle Paper
Positioning Plate HP Sensor
- Harnesses and connectors from the Saddle Stitcher Controller PCB to the Saddle Paper
Positioning Plate Motor
- Paper positioning plate drive mechanism
- Saddle Paper Positioning Plate HP Sensor (PI7)
- Saddle Paper Positioning Plate Motor (M4)
- Saddle Stitcher Controller PCB (PCB2)
[Remedy] Check/replace the corresponding harnesses/cables or connectors or the parts.
565
7. Error/Jam/Alarm