Canon imageRUNNER ADVANCE C3330 Series Service Manual page 923

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
PRJOB-CP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
DFLT-CPY 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
DFLT-BOX 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
DOC-REM 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ON/OFF of count TX at RX/report print
To set whether to enable/disable a page-basis count pulse transmission to the charge
management device at the time of RX print or report print.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Charge management device: Coin Manager, Non-Canon-made control card
Setting of color mode for copy
To set the default color mode for copy operation.
To reflect the change, it is necessary to initialize the default settings of copy function in one of the
following two ways.
- Settings/Registration> Function Settings> Copy> Change Default Settings> Initialize
- Main Menu> Copy> Logo icon in upper right of the screen> Change Default Settings> Initialize
Upon user's request
1) Enter the setting value, and then press OK key.
2) Initialize the default settings of copy function.
Be sure to initialize the default settings of copy function after change.
0 to 2
0: Based on Auto/ACS/Printer Driver settings, 1: Color mode, 2: Black mode
It differs according to the location.
Function Settings> Copy> Change Default Settings> Initialize
Function Settings> Copy> Select Color Settings for Copy> Use Auto (Color/Black & White)
Setting of color mode for Mail Box scan
To set the default color mode for Mail Box scan operation.
To reflect the change, it is necessary to initialize the default settings of scan and store function in
the screen displayed by pressing [Scan] in the main menu with one of the following methods.
- Settings/Registration> Function Settings> Store/Access Files> Common Settings> Scan and
Store Settings/Access Stored Files Settings> Change Default Settings> Initialize
- Logo icon in upper right of the screen> Change Default Settings> Initialize
Upon user's request
1) Enter the setting value, and then press OK key.
2) Initialize the default settings of scan and store function.
Be sure to initialize the default settings of scan and store function after change.
0 to 2
0: Based on Auto/ACS settings, 1: Color mode, 2: Black mode
0
Main Menu> Scan and Store> Mail Box> (Box number)> Scan
Function Settings> Store/Access Files> Common Settings> Scan and Store Settings/Access
Stored Files Settings> Change Default Settings> Initialize
ON/OFF of original removal message
To set whether to display the message to remove original when scanning with DADF without
opening/closing DADF after scanning with the Copyboard.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
911
8. Service Mode