Removing The Waste Toner Container - Canon imageRUNNER ADVANCE C3330 Series Service Manual

8. Secure the Developing Unit with the screw while holding it down.
• 1 Screw [1]
9. Install the Drum Unit.
■ Actions after Replacement
The following procedure can also be performed in [Service Mode > SITUATION > Parts Replacement > Adjustment during
Developing Unit replacement ].
1. Execute COPIER> FUNCTION> INSTALL> INISET-Y/M/C/K.
* When this is performed, each of the initialization operations is performed and the parts counters are cleared.
NOTE:
• Parts Counter : COPIER > COUNTER > DRBL-1 > DV-UNT-Y/M/C/K
2. Check COPIER>ADJUST>DENS>D-Y/M/C/K-LVL and write down on the service label of the Front Door.
3. Check COPIER>ADJUST>DENS>CONT-Y/M/C/K and write down on the service label of the Front Door.
4. Execute Auto Adjust Gradation> Full Adjust.

Removing the Waste Toner Container

1. Open the Cassette 1.
[1]
323
4. Parts Replacement and Cleaning