Detach Database; Update Database - FAG Detector III User Manual

4.5.3.2 Detach database

You can detach a database from the SQL database server as follows:
Start the Database administration.
Click Detach.
Click on Connect to connect to the master database.
From the server list, select the database server that contains the database or
enter it manually there. You can click Refresh first in order to update the list of
available servers.
Click Use a specific user name and password and enter your user name and
password to log in to the master database.
Select the Allow saving the password option.
Select the "master" database from the database list and click OK.
Click Continue in the database administration.
Select the database to be detached in the database administration and click
OK.
Click on Execute. The database is detached.

4.5.3.3 Update database

ATTENTION
Back up
You can update a database as follows:
Start the Database administration.
Click Update.
Click on Connect to connect to the master database.
From the server list, select the database server that contains the database or
98
You can only detach a datab ase if it is not b eing used
b y the Trendline Software.
If you have disconnected the datab ase from the
datab ase server, you can only access the datab ase
again with the Trendline software b y reattaching
datab ase again.
your Trendline datab ase b efore updating it!
102
the
96