FAG Detector III User Manual page 77

is displayed in the RFID number field.
Remove RFID: This option instructs the Detector to cancel the RFID tag
assignment to the measuring point during the next round.
RFID defective: The Detector has marked the assigned RFID tag as defective.
Change RFID: This option tells the Detector to replace the assigned RFID tag.
During the next round, you must delete the tag and assign a new one before
you can perform the measurement at this measuring point.
You can only select the statuses that are accessib le as a follow-up
status of the current status.
Further information in the chapter "Automatic assignment of RFID tags to
measuring points
Amplitude-Phase settings
Type of vibration unit: Select Acceleration, Velocity or Displacement.
Peak setting: Specify here whether the peak-to-peak value, the peak value or
the root mean square (RMS) should be evaluated.
Order: Select what signal order the Detector should determine (1 = rotational
speed signal, 2 = 1st harmonic, 3 = 2nd harmonic, 4 = 3rd harmonic).
Measuring point tag: Enter a name for the measuring points. You can change
the standard designation "MP" in the Program settings
measurement, the Detector adds a consecutively increasing number to this
name to uniquely identify a measuring point. Due to the size of the Detector
display, this name can be a maximum of 15 characters long.
Measurement averaging count: The Detector averages measured values
during the measurement. Specify how many values are to be used for
averaging.
Rotational speed settings
Enter the Nominal rotational speed (in the predefined unit, see "Program
settings / General
boxes. Note that a deviation of more than 10% is not possible. If the acquired
speed by the Detector is outside the rotational speed range defined here, the
Detector displays an error message
The Detector averages the rotational speed values during the measuring
process. Specify how many rotational speed values are to be used for
averaging at Turning speed averaging count. If you enter 20, for example, the
Detector averages the values obtained for rotational speed across 20
revolutions.
".
54
146 ") and the Max. allowed deviation in the appropriate input
.
263
Trendline 3
. During the
146
77