FAG Detector III User Manual page 88

CAUTION Modification of alarm thresholds may have severe effects on the
service life of the monitored components if used improperly. You
should therefore always carefully check whether the intended
settings are suitab le for your specific system.
To adjust the alarm values automatically proceed as follows:
In the System menu, click on Adjust alarm limits.
Select the required element from the configuration tree, a specific machine, for
example.
The alarm values for this element and all sub-elements it contains are adjusted.
Please select or unselect sub-elements if necessary.
You can define the default values for the alarm limit adjustment in
the program settings
Specify time range
You can use the Time range option to limit the measured values used for
averaging. To do this, enter the start and end time. Alternatively, you can enter the
end time and specify the duration in whole days in the No. of days input field. In
88
.
146