Add Manufacturer - FAG Detector III User Manual

Assign bearings to a group
To assign one or more bearings to a group proceed as follows:
Select the desired group from the Group list.
Search for one or more bearings as described at "Edit/change bearing ->
Search bearing
bearings list.
To assign a bearing to the group click on it then click on
should now be displayed in the Assigned bearings list.
To assign all bearings found to the group, click on
be displayed in the Assigned bearings list.
To delete a bearing from the group click on the bearing in the Assigned
bearings list then click on
To delete all bearings from the group, click on
Click on Save assign the bearings to the group in the bearing database.
Rename a group
To rename a group, select it from the Group list and click on
Enter a new name for the group and click on OK.
Delete a group
To delete a group, select it from the Group list and click on
Warning! the group is deleted immediately - you will not b e
prompted to confirm this! You should therefore only use these
functions if you are sure that you want to delete a group.

4.6.6 Add manufacturer

Click on Add manufacturer to create a new manufacturer.
Enter the manufacturer's data in the appropriate input fields and click on Next.
Check your input in the next window that appears. If the input is correct, click
Add to save the manufacturer in the bearing database
modify your input.
108
". The bearings found are displayed in the Unassigned
105
.
. The bearing
. All bearings should now
.
.
.
or click Back to
102