Safety Information - FAG Detector III User Manual

1.1 Safety information

The Detector hardware is manufactured in accordance with the approved
standards and guidelines (see Declaration of Conformity in the PDF appendix)
and is safe for operation. Nevertheless, the device may pose certain
unpreventable residual risks to users and third parties or objects. Therefore, it is
essential that all safety information contained in this manual is complied with.
Moreover, the universal safety and accident prevention regulations must be
considered. Non-compliance can endanger the health and life of persons or
cause material damage. The safety information in this manual are valid in the
Federal Republic of Germany. In other countries are the relevant national rules
valid.
Please note the special security information, which can be found at the
beginning of the corresponding chapter or next to the individual steps.
Operating staff
Certain features of the Detector, e.g. balancing, may be performed only by
accordingly trained staff.
10