FAG Detector III User Manual page 191

Kinematic frequencies
If you have added one or multiple bearings to a spectrum from the bearings
database using the Add bearing
displayed in the Kinematic frequencies box.
The following information is displayed:
Manufacturer / Bearing designation
BPFO: Outer race frequency
BPFI: Inner race frequency
BSF / 2xBSF: Single and double roller frequency
FTF fixed outer race: Cage frequency at fixed outer race
FTF fixed inner race: Cage frequency at fixed inner race
If a rotational speed is available for the spectrum (see Other Tools
bearing ), the FIS Viewer can also display the bearing frequencies in the
185
spectrum.
1. Check the Bearing frequencies checkbox to do so.
2. Click on the bearing frequency in the Kinematic frequencies box to display in
the spectrum.
The selected frequency is displayed in the spectrum. The bearing frequencies
multiplied by the current rotational speed are displayed in parentheses in the
Kinematic frequencies box.
Inserting comments into the diagram
You can assign comments to individual measuring points in the diagram. The
comments in the diagram are presented at the corresponding measuring point in
an information field if the display field is activated.
tool, the characteristic bearing data are
185
FIS Viewer
Add
191