FAG Detector III User Manual page 37

No data is transmitted to FAG Industrial Services Gmb H during the
update check. The Trendline software only compares the version of
your installation with the version currently availab le on our server.
Configure automatic notifications of updates
You can configure the automatic notification the first time you start the program. If
you want to adjust the settings at a later time, click in the Trendline tools menu at
Options and select Update > Update settings from the list.
Under Time interval you can enter how often the Trendline software should
check for updates. The default setting is weekly.
If your computer is connected to the Internet via a proxy server, activate the Use
proxy server setting and enter the IP address or the server name as well as
the port number you are using. If you have any questions about the
configuration, please contact your system administrator.
If you activate the Show message, if no version information could be retrieved
option, the Trendline software will also display a message even if no update
information was found.
Trendline 3
37