FAG Detector III User Manual page 302

Environment
Batteries are small chemical waste. Throw away faulty or used up batteries in a
special container or hand them in at a recycling centre.
Technical specifications
Input: 100-240 V AC, 50/60 Hz
Charging current: 800 mA +/- 10%
Set primary plug
The charger is delivered with 4 interchangeable primary plugs and the electronic
power supply (100-240 V AC). Thus, the appliance is worldwide usable.
Changing primary plug
Insert the relevant primary plug and connect it to the primary contacts (1).
Push the plug to the stop position (2). Please ensure that the input plug clicks
audibly into housing.