Uninstalling; Start Program; Automatic Notification Of Updates - FAG Detector III User Manual

4.1.5 Uninstalling

Uninstall Trendline software
To uninstall the Trendline software please click in Programs > FIS > Trendline
3.6 on Uninstall Trendline.
Uninstall Flash Updater
To uninstall the Detector Flash Updater please click in Programs > FIS >
Detector Flash Updater on Uninstall Detector Flash Updater.

4.2 Start program

Click Start > Programs > FIS > Trendline 3.6 > Trendline.
The Trendline software is starting.
When the Trendline software starts the first time, you can configure automatic
notifications for software updates.
If you have set up the Trendline software without database program and
databases, please select the CM database on the server

4.2.1 Automatic notification of updates

The Trendline software can check in user-defined intervals whether an update for
the Trendline of Detector firmware is available for download from our Internet
server. The following results are possible:
No update information could be obtained, for example, due to a problem with
the Internet connection.
The Trendline version installed is up-to-date.
A newer version of the Trendline software is available.
The firmware on all Detector devices registered in the database is up-to-date.
There is a newer firmware version for at least one of the Detector devices
registered in the database.
36
Please note that configuration and export files are left on
your computer. For your safety, the datab ase program
and datab ase(s) will not b e deleted either. To completely
uninstall, you must delete these files manually.
.
93