Edit / Delete Manufacturers; Select Bearing Database; Close; Template And Route Planning - FAG Detector III User Manual

4.6.7 Edit / delete manufacturers

Edit manufacturer
Click on Edit manufacturer to modify the data for a manufacturer.
Modify the manufacturer data and click on Next.
In the next window the Trendline shows your changes and the original data for
an easy compare. Click on Save to store your changes in the bearing database
or click on Back to change your data.
102
Delete manufacturer
If you have deleted all bearings from a manufacturer from the bearing database
(see Edit/delete bearings
Click Delete manufacturer.
Then select the manufacture from the Manufacturer list and click Continue.
The manufacturer is then deleted from the bearing database.
You can only delete manufacturers which have b een added
yourself!

4.6.8 Select bearing database

Click in the Bearing database
Select the database as described in "Select database"
included bearing database is "cm_bearings".
This opens the bearing database.

4.6.9 Close

To exit the bearing database
click Close.

4.7 Template and route planning

Constantly recurring plant structures and measurement tasks can be performed
efficiently with the help of templates and routes.

4.7.1 Template planning

A template has the same layout as a measuring point. As with a measuring point,
time signals can be recorded and different characteristic values set. If you want to
105 ), you can also remove the manufacturer.
dialog on Change database.
102
Trendline 3
b y
108
. The name of the
93
109