FAG Detector III User Manual page 168

3. Release the right-hand mouse button.
Your selection is marked in the diagram.
4. Right click once again on the diagram if you wish to return to the previous zoom
selection.
or
5. To return to the full view of the diagram hold the Shift button down and right
click on the diagram
Keyboard zoom
You can use the keyboard zoom feature to enlarge an area of the diagram using
the keyboard instead of the mouse.
1. Select the Keyboard zoom tool from the zoom tool selection list using the
mouse or press the F12 button.
2. Use the Ctrl+Q and Ctrl+W buttons to shift the start of the zoom selection.
3. Use the Ctrl+A and Ctrl+S buttons to shift the end of the zoom selection.
4. Use the Ctrl+Y and Ctrl+X buttons to shift the highlighted zoom selection to the
right or the left.
5. You can enlarge a section of the diagram by pressing Ctrl+Enter (zoom in).
6. You can reduce a section of the diagram by pressing Ctrl+Backspace (zoom
out).
7. You can return to the full view of the diagram by pressing Ctrl+Space bar.
Defining the zoom selection by inputting values
1. Click the left-hand mouse button on the current zoom tool.
The zoom selection dialogue window opens and shows the current settings for
the boundary values.
2. Enter a minimum and maximum for the X axis in the appropriate field.
168