FAG Detector III User Manual page 25

Installation type
The Trendline software can be installed in various ways. You can
install the software completely on a local computer (recommended for default
users)
or
distribute it to different computers (e.g. in a network).
The following installation types are available:
Complete setup
All software components including databases will be set up on the system.
Start the installation file "Trendline-Setup*.exe" with double-click.
The Trendline Setup Wizard
Database setup
Only the database installations (Database program optional with databases) will
be set up on the system.
Start the installation file "TrendlineDatabases-Setup*.exe" with double-click.
The Database Setup Wizard
Flash Updater setup
Only the Flash Updater, to update the Detector firmware, will be set up on the
system.
Start the installation file "DetectorFlashUpdater*-Setup.exe" with double-click.
The Flash Updater Setup Wizard
If you want to install components individually, e.g. to
distrib ute them on different computers, make sure that
these computers have a network connection so that the
components can communicate with each other. In any
case the CM datab ases must b e registered on the
computer where the datab ase program is installed.
guides you through the installation.
26
guides you through the installation.
30
guides you through the installation.
28
Trendline 3
25