Setting Characteristic Values - FAG Detector III User Manual

Click on and
edit the settings.
Click on OK.
Measured values
In the Measured data section you can display the acquired data numerically and
graphically. For more information refer to Measured values

4.4.4 Setting characteristic values

You can create the following characteristic values per measuring point:
ISO 10816,
A and A ,
sel eff
D and D ,
sel eff
Temperature,
V ,
sel
Crest factor and
Universal.
Please also observe the information in the "Frequency selective characteristic
values " section.
270
Characteristic values can b e changed until they have b een sent to
the Detector for the first time. After that the characteristic values turn
grey in the tree and cannot b e altered anymore. Otherwise, the
measuring results could not b e compared.
To add a new characteristic value, right-click the measuring point the
characteristic value is meant for and, after that, on New sub-item. Alternatively,
you can do it via System > New sub-item or via
opens:
Trendline 3
.
117
. The following window now
65