Other Tools - FAG Detector III User Manual

Show vertical lines
Modifying the properties of the revolutions cursor
In addition to the general cursor options described in Modify the cursor properties
you can also modify the additional option for the revolutions cursor – this is
179
described below. To do this, activate or deactivate the appropriate fields in the
dialogue window or enter the appropriate value in the input field.
RPM Enter a rotational speed [rpm] in the input field. The Trendline
Viewer uses this value to calculate the corresponding frequency
and positions the revolutions cursor at the appropriate location in
the diagram.

5.3.8 Other tools

Copying a diagram as a graphic to the clipboard
You can use this tool to copy the current diagram view to the clipboard.
1. Click on the Copy diagram to clipboard symbol.
2. Switch to the application in which you would like to insert the image.
and sidebands are removed from the display.
Switched on the harmonics and sidebands are
:
identified in the diagram using the cursor symbol and a
vertical line.
Switched off the harmonics and sidebands are
:
identified using only the corresponding cursor symbol.
FIS Viewer
185