FAG Detector III User Manual page 130

Click on Show trends to create a trend graph that of the measured values for
the period specified.
Click on Selected to display only a selection of available characteristic values
and select the required characteristic values from the list.
You can use the Show table of results option to instruct Trendline to create a
table containing the measured values.
Select time signal / FFT
In the Time signal / FFT area you can specify which time signals are displayed
and also whether their corresponding frequencies should be included in the
report.
Click on Time signal or FFT to activate the corresponding display.
Click on Selected to display only a selection of available signals and select the
required signals from the list.
Click on Last time signal / FFT only to display only the last signals saved in
each case. All previous measurements will be ignored.
Display additional information
The following options can be selected under Additional info:
130