Click OK to save the new sensor.
4.3.2 Installing USB-serial converter
A USB serial adapter is supplied with the Detector in order to connect the
Detector to computer via USB.
When installing the adapter software make sure you have the adapter and the
installation CD provided to hand.
Do not plug in the adapter!
Installation of the adapter software
To install the adapter software proceed as follows:
Insert the CD provided. The installation program should start automatically.
If the installation program does not start automatically you can start it manually
using Windows Explorer:
1. Open My computer.
2. Under Equipment with removable media, right-click the CD-ROM drive, then
click Open.
3. Double click to launch autorun.exe.
4. Depending on the color of the adapter provided, select USB TO RS232
Converter or USB 2.0 TO RS232 Converter.
48