FAG Detector III User Manual page 207

4. Click on OK to apply these settings.
Trend diagram
In addition to the display settings already presented with the FFT diagram and the
diagram information bar option the settings for the trend display and smoothing
can also be specified in the Trend diagram
1. The section Display options allows you to adjust the background color of the
time signal diagram. You can also define here whether you wish the grid to be
displayed in the background and also its color.
2. In the Trend display settings you can specify field whether each characteristic
value should be displayed in a separate diagram (Stacked view) or whether all
characteristic values should be displayed in one diagram (Overlapped view).
3. You can specify which function and which period length should be used to carry
out the smoothing calculation in the Smoothing field.
4. In the Information bar field you can specify whether diagram information and
comments should be displayed when a new diagram is opened.
5. In the Toolbar field you can specify whether Signal selection, Axis settings,
and Zoom tools should be displayed when you open a new diagram.
6. In the Trend limitation on load field you can specify how many trends of the last
days and maximum data sets should be load in the Viewer.
7. Click on OK to apply these settings.
Modifying the cursor options
You can modify how each individual cursor is displayed in the dialogue windows
for the various cursors.
1. Select the cursor you wish to modify from the list of cursors on the left.
2. Select the preferred cursor shape for the cursor specified above from the
Symbol drop-down menu.
3. Select the symbol and color to be used for the cursor as well as the color for
vertical cursor line.
4. Because the differential and averaging cursors work in pairs, you can also
modify the appearance of the second cursor in this field accordingly.
5. Click on OK to apply these settings.
Modifying the signal settings
You can select measurement data display options in the signal dialogue
windows.
1. If fewer than 50 measuring points are displayed in the diagram window, each
measuring point can be made clearly visible as a dot. If greater than 50
dialogue window.
206
FIS Viewer
207