FAG Detector III User Manual page 64

range, click Deactivate bearing for all measurements of following time
range and select the time range.
Click on OK.
Show and edit bearing information
Click on the desired bearing and
then click .
This displays the bearing information in the bearing database.
Edit the Speed correction factor (SPF) and select Fixed outer race optionally.
The kinematic frequencies can only be changed in the bearing database.
Click on OK.
Additional kinematic frequencies for analysis
In this section you can define additional kinematic frequencies for analysis.
These are also displayed in the evaluation diagram in the FIS Viewer.
Add kinematic frequency
Click on .
Enter the Name, the Speed correction factor (SPF) and the Normalized
frequency.
Click on OK.
The additional kinematic frequency will be added.
Delete kinematic frequency
Select the kinematic frequency to delete.
Click on and
click on Yes.
Edit kinematic frequency
Select the kinematic frequency from list.
64