FAG Detector III User Manual page 113

A new window that is divided into three parts will open. On the left you will find the
configuration tree, in the middle the routes, and on the right-hand side the
settings, respectively (same as in configuration view). To create a new route,
follow the sequence below:
Right-click the middle window and subsequently on Add Route. Alternatively
you can click on
Name the route in the right window and add a picture, if desired (for that, click
on ).
Now you can add elements from the configuration to the route. You can do that
in two different ways:
- Left-click in the configuration tree on the element you want to add to the route
. Next, left-click in the middle window on the route you want to modify. Finally,
click or select in the contextual menu Add selection.
- Left-click on the part of the configuration tree you wish to add. Keep the left
mouse button pressed and drag the element onto the name of the route.
Release the mouse button.
With and with
selected or close again respectively.
Repeat this procedure for all routes you want to create, e.g. for Monday to
Friday.
Click on to close the route planning.
Edit route
To change route settings,
just as well.
you can unfold the tree starting from the element
Trendline 3
113