FAG Detector III User Manual page 49

4. Click on the folder symbol next to Product Driver.
5. Select the win_98se_me_2000_xp folder.
6. Click on Setup.exe.
This launches the installation wizard, which guides you through the installation.
Plug the adapter into a free USB port.
If you are already using other devices that use a Prolific USB to
Serial chip, please uninstall the drivers for the old devices first as
this may result in conflicts.
Checking serial interface settings
To make sure that communication between the Trendline software and the
Detector works smoothly, you can check the USB serial adapter settings for the
serial interface:
1. Click the right mouse button on My computer then click on Properties.
2. Click Hardware then Device manager. The adapter should be displayed as
"Prolific USB-to-Serial Bridge" under Connections (COM and LPT).
Trendline 3
49