FAG Detector III User Manual page 74

Edit comment
In order to edit a measurement comment, click on the measurement and then
on .
Show details
To display the details of a measurement click on the appropriate entry in the list
then click on .
The Trendline software displays the sensor position, time of measurement,
rotational speed, amplitude and phase of the vibration at the sensor at each
stage of the balancing measurement. If you also wish to see the suggested
weights and their amplitude and angel or coefficients used and their
corresponding amplitude and phase, click Show proposed weights or Show
coefficients.
If you wish to hide the details again click on
Display sensor charts
Click Sensor charts to display the position of the sensors as a chart.
Trendline enters the sensor position on a circular chart for each individual step of
the measurement. You can activate/deactivate the display of each sensor at
Sensor position n.
74
.