FAG Detector III User Manual page 260

The measurement cannot be saved and you also cannot view any time signals,
FFTs or Trends. You can, however, perform an additional measurement:
Press the Enter key
Press the Esc key
Headset
The headset function can be activated under Single measurements > Headsets.
Here you can "listen to" a measuring point and adjust the amplification factor for
this option. The headset cannot be used in the Detector during a measurement.
In addition to headset, an analog recorder may also be connected to the 3.5 mm
jack. Measurement with headset is described in more detail in using a headset
.
233
Temperature
The temperature can be measured directly via Single measurements >
Temperature without requiring prior configuration. The procedure is the same as
for a normal Temperature measurement
temperature cannot be saved.
Rotational speed
The rotational speed can be measured directly by selecting
measurements > Rotational speed. The Detector shows the current and the
average rotational speed. If you want to set pulses per rotation, press on
or press the Enter button
260
in order to take a measurement for the same class.
to select another class.
233
and enter the number of pulses.
. The only difference here is that the
Single
or