The Diagram Information Bar - FAG Detector III User Manual

information can be displayed or removed for each diagram with Ctrl+U.
The measuring information for the Trendline Viewer shows important
measurement data according to the diagram type. This measuring information is
always visible in the diagram and cannot be removed.
The table below shows the corresponding values displayed in the cursor
information for the currently active cursor type:
Cursor type
Base
cursor
Measure
cursor
Difference
cursor
RMS/AMV
cursor
Harmonic
cursor
Sideband
cursor
HS cursor
Revolutions
cursor

5.2.6 The diagram information bar

You can find the diagram information bar in the right-hand column of the working
area. This column contains additional information on the diagram currently
selected and can be displayed or hidden as required.
Displayed cursor information
FIS Viewer
159