Intended Use; Modifications By The User - FAG Detector III User Manual

2.1 Intended use

The Detector as well as the associated components are not
admitted for the use in residential areas!
Detector devices must only be operated within the limits specified in the
Technical data
15
components must always be taken into consideration too.
Any other use exceeding the above is deemed unintended and the user will bear
the full risk associated with it. The user is responsible for the intended use. This
includes the compliance with these instructions.
Information to the user
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Industry Canada
This Class A digital apparatus complies with Canadian ICES-003.

2.2 Modifications by the user

The user may not carry out any modifications to the hardware of the Detector
device. The user is merely allowed to make setting changes to the device by
means of the Trendline software. For modifications in exceeds to this the user
bears all responsibility! Should you encounter a defect in your Detector please
contact your customer adviser
14
to the extent provided, the limits of use of the individual
.
277