Working With The Viewer; Displaying Several Diagrams Simultaneously; Modifying The Appearance Of A Diagram - FAG Detector III User Manual

Diagram information
This field contains general information about the measurement data including
Information on the measuring process such as the low pass or sample rate
Further information included in the data sets.

5.3 Working with the Viewer

5.3.1 Displaying several diagrams simultaneously

You can open several diagrams in the FIS Viewer simultaneously and arrange
these in the working area according to your needs.
Select one of the following options from the Diagrams menu: Tile horizontally,
Cascade, Full screen, Arrange icons or List....
The windows are rearranged accordingly.

5.3.2 Modifying the appearance of a diagram

Displaying and removing signals
When a new data set is opened the Viewer simultaneously displays all signals
contained in the data. In order to obtain a clearer overview you can activate or
deactivate individual Signal selection in the list shown below. All series of
measurements included in the current data set are listed in the Trendline
software signals field. The options Show alarms and Averaging, are only
available in Trend.
1. Click on the checkbox in front of the signal.
FIS Viewer
161