Route Report; Balancing Report - FAG Detector III User Manual

4.14.3 Route report

You can use the Route report to create an overview of settings and measuring
points for a specific route.
Click on Route report in the Service menu and select a route that has been
defined in your configuration.
Click on OK to create the report. The report window opens.
You can use the toolbar to control the screen display:
The display size can be defined in
zoom factor expressed as a percentage in the Percent input field.
You can navigate forwards or backwards through the report and also jump to
the start or end of the report using the arrow buttons.
Click on to print out the report.

4.14.4 Balancing report

To create a balancing report, click on an element of your system structure. Next
click on Balancing report in the Service menu. The Configure report properties
window opens.
Print balancing configurations: If this option is selected the settings for the
balancing configuration
Print planes: Information on the planes is included in the report.
View. Select Percent adjustable to enter a
are printed with the report.
69
Trendline 3
133