FAG Detector III User Manual page 182

Cursor type:
Smart peak
detection
Calculated harmonic
Show coordinates
182
locate the nearest measured value for the harmonics
calculated.
Micro steps
Micro steps are necessary to allow the basic frequency
to be more precisely defined. In this selection box you
can enter the increment between two measured points
that will be used to specify the basic frequency and also
calculate the harmonic.
The harmonics are precisely calculated for the current
cursor. The indicators for the harmonics are set so they
locate the nearest maximum value for the harmonics
calculated.
Nearest points
The Trendline Viewer calculates the precise mathematic
values of the harmonics. The intelligent cursor analyses
the number of nearest points specified in this field
(measuring points in the diagram in both directions) for
maximum values and positions the indicator for the
harmonic at the nearest maximum value.
In this field you can enter the number of harmonics that
must be calculated in each case.
In this field you can enter the number of sub harmonics
that must be calculated in each case.
Switched on: the coordinates (value pairs) of the
harmonics are displayed in the diagram.
Switched off: the coordinates (value pairs) of the
harmonics are removed from the diagram.