Alarm Report - FAG Detector III User Manual

4.14.2 Alarm report

You have the option of displaying main alarms and pre-alarms in an alarm report
using the Trendline software.
The alarm report incorporates sections for main alarms and pre-alarms. All
characteristic values for a given measuring point will be displayed in the main
alarm section where at least one main alarm exists for this measuring point.
Characteristic values having a main alarm are displayed in bold; for pre-alarms
they are in italics. If neither a main alarm nor pre-alarm exists, the relevant
characteristic value is displayed in gray.
Where a main alarm exists for a characteristic value, the main
alarm threshold is used as reference for the exceeding value, and
where a pre-alarm exists the pre-alarm threshold is used as
reference.
To do this, select the element in the configuration tree from which you wish to
create the report.
Click on Service > Alarm report or click on
Select the Time range option to define the limits for the report period. Enter the
start and end time. Alternatively, you can enter the end time and specify the
duration in whole days in the No. of days input field. In this case the start time
will be determined automatically.
Deactivate the Time range option to incorporate all available data in the report.
Click on OK to create the report. The report window opens.
You can use the toolbar to control the screen display:
The display size can be defined in
zoom factor expressed as a percentage in the Percent input field.
You can navigate forwards or backwards through the report and also jump to
the start or end of the report using the arrow buttons.
Click on to print out the report.
132
in the Toolbar
View. Select Percent adjustable to enter a
.
40