Menu And Toolbar - FAG Detector III User Manual

the machine where the measuring location is located and the section where the
machine is located.
Next to the name of each element of the configuration and system structure you
will find a box that is highlighted in color. This indicates the alarm status for this
part of the system as shown in the following table.
Color Meaning
For this lev el of the sy stem structure no alarm is recorded.
For this lev el of the sy stem structure a preliminary alarm w as signaled.
For this lev el of the sy stem structure a main alarm is recorded.
This lev el has just been created or
the alarm is not ready configured or has been canceled.
An RFID tag has been assigned to this measuring point.
An RFID tag in this part of the sy stem has been marked as defectiv e.
On the right-hand side next to the configuration and system structure you can
insert an image. At the highest level you will find the tab sheets, where you can
adjust the settings of the individual measuring points.
The dividing line between the image of the configuration and system structure
can be shifted towards the right or left by dragging with the mouse.
In the configuration structure, always one element is marked. The
properties of this element are depicted in the right-hand part of the
window.

4.2.2.2 Menu and toolbar

Menu bar
The menu bar allows access to the following functions of the Trendline software:
Menu Menu items and function
File New
Open
Import
Ex port
Recently used
40
Creates a new database.
Opens an ex isting database.
Loads records ex ported w ith Trendline.
Ex ports part of a current measuring point structure using the Ex port
Wizard or ex port a single measuring point
137
Trendline display s recently used databases at this point in the menu.
.
138